17-4 PH Set Screws

17-4 PH Set Screws

17-4 PH set screws are made from a precipitation hardened stainless steel most known for its exceptional strength and its ability to maintain its mechanical properties to 600°F. 

Compared to 316 stainless steel, 17-4 PH screws yield strength is up over 4 times greater. When compared to Duplex 2205 screws, the yield strength of 17-4 PH can be up to 2-½ times greater.

17-4 set screws are available in 8 different aged (precipitation hardened) conditions offering a variety of mechanical properties.

An extremely strong precipitation hardened stainless steel

· Well suited for high strength applciaitons

· Up to 4x stronger than 316 stainless steel

· Maintains its mechanical strength up to 600°F

· 17-4PH Chemistry & Specifications

· 17-4PH set screw features and benefits

· 17-4PH Datasheet

Resources: 17-4PH Torque Specs

17-4 PH Screw Types: 12 Point Screws, Button Head Cap Screws, Flat Head Screws, Hex Cap Screws, Pan Head Screws, Set Screws, Socket Head Cap Screws, Tamper Resistant Security Screws, Torx Screws, Vented Screws

17-4PH Set Screw Features & Benefits

17-4PH set screws are unique in that they have no screw head, meaning that they have no protruding part past the threaded shaft. They are thread only and are available with a socket or slotted driver insert at one end. Set screws are used to secure an object within or against another object. Typically they secure a rotating part such as a gear or shaft. 17-4PH set screws are driven through a threaded hole in the rotating part until it is tight against the inner object, preventing from moving relative to the outer object. Set screws are available with various points depending on the application.

Cup Point 
This is the most commonly used set screw and is identified by a cup-shaped indentation on one end. 17-4PH cup points are typically used for a quick, semi-permanent or permanent applications where it is acceptable to cut the cup point edge of the screw.

Cone Point

A cone point is easily identifiable by its sharp cone-shaped point – just like an ice cream cone. 17-4PH cone point set screws deliver the strongest clamping force due to the deep penetration of the point. As a result they are used for permanent assembly.

Flat Point
The cheapest and simplest of the set screw point styles, this screw has a flat surface on the bottom of the screw. This type is used when you need the ability to frequently change parts and require minimal shaft deformation.