A286 Washers

A286 Washers

A286 washers, also known as Alloy 660 washers are stainless steel alloy which contains iron, nickel and chromium. A286 washers are known for their high strength, creep resistance and oxidation resistance at elevated temperatures once age hardened.  As a result, A286 / Alloy 660 washers provide high levels of strength from room temperature up to about 1300°F (700°C).

A286 washers are also mildly corrosion resistant. While they should not be used for strong acid environments, they provide excellent oxidation resistance up to 1500°F (815°C) in conditions that would typically be found in high temperature exhaust streams.

A286 / Alloy 660 for excellent high temperature oxidation resistance

· Good material for high temperature oxidation resistance

· Maintains high strength at elevated temperatures

· Specifications and heat treatments

· A286 chemistry

· ASTM A453 Grade 660

· A286 Datasheet

Applications

Because of the properties of Alloy 660 / A286, these washers are often found in high temperature engine, manifold, exhaust and turbine applications as well as off-shore oil & gas applications. In addition, A286 / Alloy 660 is also non-magnetic and finds a niche in non-magnetic cryogenic equipment. Extreme Bolt & Fastener also offers A286 fasteners to ASTM A453 Grade 660 specification. For critical high temperature applications, the ASTM A453 Grade 660 specification ensures the proper tensile and stress rupture properties.

Resources: A286 Torque Specs

Washer Styles: Lock Washers

ASTM A453 Grade 660

Material specification ASTM A453 Grade 660 applies to bolts, studs, nuts and other fasteners. It ensures fasteners meet strength standards for use in high temperature bolting applications. ASTM A453 Grade 660 is classified into 4 property classes / heat treatments: A, B, C & D, each designated with different tensile and stress rupture properties. The most common of the ASTM 453 classes are class A or D. The grades A, B and C all have the same minimum tensile strength and minimum yield strength of 130ksi and 85ksi respectively. However grade D has a significantly better yield with a min tensile of 130ksi and a min yield of 105ksi.

Additional A286 / Alloy 660 Specifications, Cold Working & Heat Treatments (1.4980)

AMS A286 / Alloy 660 Heat Treatments

By AMS numbers, the most common for A286 / Alloy 660 is AMS 5737 (same as Grade A) and then AMS 5732 (same as Grade B).

A286 / Alloy 660 Cold Worked Fasteners

For additional strength, A286 could be aged and cold worked to achieve a min ultimate tensile strength of 160ksi upon request.

Additional Specifications

UNS S66286, ASTM A453, AMS 5525, AMS 5726, AMS 5732, AMS 5737, AMS 5804, EN 1.4980, GE B50T1181, GE B50T12, GE B50T81, Werkstoff 1.4980, ASTM F2281

A286 / Alloy 660 Chemistry

Mechanical Properties