Duplex Stainless Steel Fasteners

Duplex Fasteners - Bolts, Nuts & Screws

Duplex 2205 and Super Duplex 2507 (UNS S32205 / UNS S32750) stainless steel fasteners are characterized by their high yield strength, which is twice that of annealed austenitic stainless steels, like 304 and 316. In addition, Duplex steels offer improved corrosion protection compared to 300 series stainless, especially in terms of localized corrosion such as crevice and pitting, as well as stress corrosion cracking.  In general, Duplex steel bolts are a great step up from 300 series stainless.

The main difference between the Duplex alloys is that 2507 offers higher strength and better corrosion resistance compared to Duplex 2205.
•  Duplex 2205 (1.4462): Higher strength and corrosion resistance than 300 series stainless.
•  Super Duplex 2507 (1.4410): Improved corrosion resistance and strength compared to 2205.

Engineered stainless: 2x stronger yield than 316 stainless steel

· Decent general corrosion & cracking resistance

· Chemistry & Specs: Duplex 2205, Super Duplex 2507, Zeron 100

· ASTM A1082 fasteners

· Insight on Duplex 2205, Super Duplex 2507 and Zeron 100

· Strength Properties: tensile, yield & elongation charts

· Duplex stainless steel fastener styles

· Fastener availability and lead time

· Duplex Screw FAQ of the Week

· Datasheet for Super Duplex 2507

· Datasheet for Duplex 2205

Mechanical Properties
Duplex 2205 bolts provide a typical UTS of 110ksi and a yield strength of 80ksi, whereas Super Duplex bolts offer slightly higher strength at 125ksi UTS and 82ksi yield. In general, Duplex fasteners have significantly better toughness and ductility than ferritic grades of steel, but not the levels of austenitic grades. Usage of both a Duplex screw and Super Duplex stainless steel screw should be limited to temperatures below 570°F, as extended exposure to elevated temperatures can embrittle this material. 
Key properties:
•  High strength and fatigue resistance
•  Good toughness & ductility
•  Temperature usage limit: 570°F
•  Low thermal expansion

Corrosion Resistance
Though Duplex steel screws are not ideal for harsh chemical environments, they do offer better corrosion resistance than 300 series stainless steel and are ideal for saltwater and chloride applications. Duplex bolts offer resistance to:
•  Saltwater: salt air, brackish water and marine environments.
•  Localized chloride corrosion: pitting and crevice corrosion as well as stress corrosion cracking.
•  Sulfide stress corrosion resistance
•  Oxidation

Which Duplex Steel is Best for Your Application?
The most common grades of Duplex steel fasteners are Duplex 2205 and Super Duplex 2507. If you are still not sure, our engineering team is here to offer their expertise on which grade will meet the specific requirements of your application. 

Duplex Steel Fastener Stock and Availability

Stock
Common sizes of Duplex fasteners (both metric and standard) are kept in stock in both 2205 and 2507, including hex head bolts, hex nuts, lock washers and flat washers. Additionally any size could be made to order.

Custom Availability
We can make both common and custom-to-print Duplex fasteners. Typically, we require a minimum quantity of approximately 25 pieces, depending on the fastener size and type. We also can provide fasteners in Zeron 100, F55 and other grades. The lead time for Duplex fasteners is about 4 weeks. Be sure to contact us for specific lead times and expediting needs.
•  Diameter sizes:  Standard #00 – 4” in diameter / Metric M1.2 – M48
•  Threads: UNC, UNF, UNJ, UNR, Rolled or Cut
•  Minimum Volume – Typically 25pcs depending on size and stock
•  All ANSI/ASME and DIN / ISO standards
•  NACE MR0175, ASTM, ASME, MIL specifications, DFAR and Domestic available

Duplex Fastener Styles

ASTM A1082 Bolting Specification

For special applications, Extreme Bolt & Fastener can also provide Duplex stainless steel fasteners per ASTM A1082 specification. This specification applies to bolting and has been approved for use by agencies of the Department of Defense. ASTM A1082 sets standards for chemical composition and mechanical properties. 

Mechanical Data

Duplex Steel Screws

12 Point Screws	Duplex and Super Duplex 12-point screws are ideal when higher torque (than a socket head or hex head) is needed. Duplex 12 point screws are typically less economical due to the intricacy to manufacture the head. Available in 1/4" or larger sizes.	•  IFI-115 •  MIL SPEC •  DIN 34822 •  DIN 34821
Button Head Cap Screws	Duplex steel button head screws provide a broad clamping area combined with a low-profile head. Button heads are most commonly available with a socket driver and are best for fastening materials that are too thin to counter bore.	• ASME B18.3 • ASME 18.3.4M • DIN 7380 / ISO 7380
Flat Head Screws	Typically offered in an 82° countersink angle, Duplex flat heads can also be custom made to other angles from 60° -120°. These screws are designed to be flush with the surface. We offer Duplex flat heads screws with slotted, phillips and socket head mechanisms. Torx and tamperproof drivers can also be manufactured per drawing.	•  ASME B18.3 •  ASME B18.3.6 •  DIN 963 / ISO 2009 •  DIN 965 / ISO 7046 •  DIN 7991 / ISO 10642
Hex Head Cap Screws	Duplex hex head cap screws feature an added washer face and tighter dimensional tolerances compared to a hex head bolt. Best for high clamping force and easy access.	• ASME B18.6.3 • DIN 931 / ISO 4014 • DIN 933 / ISO 4017 • DIN 961 / ISO 8676
Pan Head Screws	Duplex pan head screws feature a rounded top and are best used for small diameter uses. We offer both slotted or phillips driver – depending on the size and length of the fastener.	• ASME B18.6.3 • DIN 7985 • DIN 921 • DIN 85 / ISO 1580 • DIN 84 / ISO 1207   (cheese head) • DIN 966 / ISO 7047   (raised counter sunk)
Security Screws	Duplex tamper proof screws are available in a wide range of driver designs. They provide resistance to unwanted removal – as they are inaccessible with a common screw driver.
Self Drilling Screws	Available in diameters from #4- 3/8” and  4-10mm, Duplex self drilling screws have both a drilling and fastening mechanism all.	• ANSI B18.6.4 • DIN 7504
Set Screws	Duplex set screws can be made with a cup, cone, flat, dog and half-dog points. They have no head and feature a socket or slotted driver at one end.	• ASME B18.3 • DIN 913 / ISO 4026 • DIN 914 / ISO 4027 • DIN 915 / ISO 4028 • DIN 916 / ISO 4029
Socket Head Cap Screws	Duplex socket head cap screws offer a safe, reliable fastening solution for situations with limited access / clearance around the screws. Duplex socket heads are an economic fastener.	• ASMET B18.3 • DIN 912 / ISO 4762 • DIN 7984
Vented Screws	Duplex steel vented screws are ideal for high vacuum environments because they feature a hole drilled through their axis (from head to thread end) which allows gases/contaminents to vent and relieve pressure. Vented screws can be made in any style.

Duplex Steel Bolts

Hex Head Bolts	Duplex hex head bolts are an economic solution when high clamping force and easy access are needed. They are like hex head cap screws, but without the washer face.	• ASME B18.2.1 • DIN 931 / ISO 4014 • DIN 933 / ISO 4017
Shoulder Bolts	Duplex shoulder bolts consist of a head, shoulder and threaded segment. The smooth shoulder section allows for rotating parts. These Duplex bolts are most commonly offered with socket drivers.	• ASME • DIN 7379 / ISO 7379 • ISO 7370
Wedge Anchor Bolts	Duplex wedge anchor bolts (also known as anchor studs), offer one of the most secure fastening solutions for attaching materials to concrete when high strength is needed.

 Duplex Nuts

Hex Nuts	Duplex nuts are available in a variety of styles: finished hex nuts, jam nuts and heavy hex nuts.	• ASME B18.16.3 • ASME B18.2.2 • DIN 439 / ISO 4035 • DIN 934 / ISO 4032 • DIN 986
Lock Nuts	Duplex lock nuts are can be made in both all-metal (flexloc, top lock, stover) and polymer insert styles. All-metal Duplex lock nuts are ideal for high temperatures. Polymer insert styles are more economical and are best for temperatures under 350°F.	• ASME B18.16.3M • DIN 980 / ISO 7042 /     ISO 19513 • DIN 6923 / ISO 4161 • DIN 985 / ISO 10511 /   ISO 7040

  Duplex Studs & Threaded Rod

Studs	Duplex studs are fully threaded or partially threaded fasteners that are made to custom lengths under 1ft (12 inches).	• ASME B18.31.2 • DIN 976
Threaded Rod	Duplex threaded rod are fully threaded lengths of rod that are greater than 1 foot. Our minimum order quantity is a total of 6 feet of rod (1 x 6ft rod, 2 x 3ft rods, etc).	• ASME B1.1 • DIN 975
Weld Studs	Duplex weld studs can be made in both arc and capacitor discharge (CD) styles. Weld stud fasteners create an extremely secure fastening solution for permanent attachments when there is only one side of the application that is accessible.

Duplex Washers

Flat Washers	Duplex washers are available in SAE, USS, oversized and custom sizes upon request.	• ASME 18.21.1 • SAE / USS • DIN 125 / ISO 7089 /   ISO 7090 • DIN 126 / ISO 7091
Lock Washers	Duplex split lock washer as well as Belleville spring lock washers can be made in common and custom sizes.	• ASME B18.21.1 • DIN 127 / ISO 7090 • DIN 6796 /  ISO 10690